This site and all its contents copyright © Loz Harrop Lures 2017-19
I have decided to produce a lure designed by Loz for his personal use and never before maarketed. From what I am told the action of the lure is similar to the Darter range except instead of a lazy arc action this lure dashes from the start to the finish so based on this I have named the lure Billy (Whizz). There is one main difference between Billy and all other Loz Harrop lures in that Billy is curved all round so there is a lot more work involved in making it. Below I will be putting pictures of each stage of Billys' production, however as I have other lures ot make this page won't be updated daily.
Make new template
Mark out stock
Saw blanks from stock
Sand tail end to profile. This is to stop the router bit ripping on the tight corners
Drill location/clamping hole.
Ream hole
Machine profile to template
Roundover both sides
Sand to remove router cutter mis-match
Drill eye and weighting holes and shape side profile.
Fill tooling hole and sand when dry.
Weight.
Memory card failure - to be continued on next manufacturing run.